How to Play Tak: Setup, Stack Movement, Roads & Capstones
Learn Tak on a 5×5 board: the opponent-colored opening, placing pieces, moving stacks, flattening walls, and checking road versus flat victory.
Source-checked rules with original teaching examples
Quick answer: how do you play Tak?
Tak: A Beautiful Game is a two-player abstract strategy game in which you build a connected road from one edge of the board to the opposite edge using the pieces you control. Players alternate either placing a new piece in an empty square or moving a stack that has their piece on top.
Stones played flat can build roads, standing stones act as blocking walls, and a capstone can join a road or flatten a wall. If nobody makes a road before the board fills or a player runs out of pieces, the player with the most exposed flat stones wins.
Step 1: prepare a 5×5 game
Lay out a five-by-five square board with 25 spaces. Give each player a supply of 21 ordinary stones and one capstone in their chosen color. Ordinary stones are placed either flat or upright; a capstone has a distinct shape.
Begin with an empty board. Determine who goes first at random if this is a first game. Larger boards use different numbers of pieces: 6×6 uses 30 ordinary stones and one capstone per player, but this guide’s teaching examples use 5×5.
Stones not yet on the board stay in each player’s reserve. Placing a piece uses one reserve piece; shifting pieces already on the board does not use up additional reserve stones.
Step 2: make the two opening placements
The first two turns use the special opponent-color opening. The starting player places one of the opponent’s ordinary stones flat in any empty square. The second player then places one of the first player’s stones flat in another empty square.
For example, if White moves first, White places a black flat stone. Black then places a white flat stone. White takes the first normal turn afterward, placing or moving one of White’s own pieces as appropriate.
Those opening stones are genuinely the opponent’s colors; they are not temporarily controlled by the person who set them down. You cannot begin the game by dropping a capstone or a standing wall.
On a normal turn, choose Place or Move
After the opening, every turn chooses exactly one action: either Place one new piece from your reserve in an empty square or Move a stack you control. You may not pass while legal play remains.
To place, you may play an ordinary stone flat, play it standing as a wall, or place your available capstone. The destination must be an empty square. Newly placed pieces cannot be dropped directly on top of an occupied square.
To move, choose any stack whose top piece is yours—even a stack that is only one piece tall—and use the movement rules below.
Flat stones and road connections
Flat stones are ordinary stones laid horizontally. Your road is a continuous chain of adjacent spaces whose top pieces are your flat stones or your capstone.
Road segments touch edge to edge. A diagonally adjacent stone does not connect to the road, and no piece moves diagonally. A completed road may bend, zigzag or branch as long as a path connects the two opposite edges.
A flat stone hidden under another piece does not currently count as a visible road space for its owner. Control is determined by whichever color shows on the top of a stack.
Standing stones: where walls can go
An ordinary stone played upright becomes a standing stone, or wall. It occupies its square and blocks a road while it stands, including its own color’s road.
Walls cannot be covered by ordinary moving stacks. You cannot turn a wall into a flat stone whenever you wish. The only normal way to flatten one is with a capstone performing a legal flattening move.
Because walls block both colors, a wall can prevent an opponent’s immediate connection while making your own future line more difficult.
Stack control and top pieces
Stacks form during movement when pieces are dropped on occupied squares. A square’s owner for movement and road purposes is the player who owns its topmost piece, irrespective of the colors buried underneath.
If Black moves a black-controlled stack onto a white flat stone and leaves a black flat piece on top, Black now controls the resulting pile. The white stone remains inside it; it is not captured off the board.
Stacks have no maximum height. The restriction applies to how many pieces you can lift and carry in one move, not how tall the pile can become.
Carry limit: how many stones may you pick up?
For a 5×5 board, the carry limit is five pieces. You may lift one to five stones from the top of a stack that you control, leaving any lower stones behind in the starting square.
Move the lifted group along a single straight orthogonal line. You must drop at least one piece onto each square crossed. Pieces drop from the bottom of the carried group first. You may not turn a corner halfway through the move.
For example, picking up five stones and moving through three squares could use drops of two stones, then two stones, then one. Different distributions are possible, but every traversed square must receive a piece.
Why the drop order matters
If the carried stack has five stones from bottom to top, its bottom stone or stones are deposited first. The final square receives whichever stones remain, including the original top piece if you carried it that far.
This can deliberately leave an opponent’s buried piece on top of one intermediate stack while saving your own top piece for the final destination. The move changes control of multiple squares in a single action.
Check both the number of stones dropped and which colors are exposed after every stack movement. That is how road ownership and potential flat scoring are determined.
The capstone and the wall-flattening exception
A capstone contributes to roads and cannot normally be covered by any other piece. It also may move onto a standing stone to flatten that wall—whether the wall is your own or the opponent’s.
The flattening is permitted only when the capstone moves by itself onto the wall on the final step. A moving stack may drop its other pieces on earlier spaces, leaving the capstone alone for the last drop onto the standing stone.
You cannot flatten a wall with a pile containing other stones in the final drop, and you cannot move onto an existing capstone. The flattened wall remains below the capstone instead of being removed from the game.
How to win immediately with a road
A road victory happens as soon as a continuous path of your exposed flat stones and capstone touches two opposite edges of the board. The path can run north–south or east–west; corners touch two sides but do not let you use diagonal-only connections.
After a move, check both colors. If the active player’s move produces a road for both players at once, the active player wins under the creator’s rules. A player need not announce a threat in advance, although calling ‘Tak’ as a warning is customary.
A winning road takes priority over the alternative endgame count. Do not declare a flat win while a legal completed road exists.
How to score a flat victory or draw
If a player places their final reserve piece or the board becomes completely full, the game ends unless a road has already won it. Then compare each player’s exposed flat stones on top of stacks.
Buried pieces do not count, nor do upright standing walls. The rules describe this as a flat-stone count, rather than counting total stones owned or the height of stacks.
If both players have the same number of counted flat stones, the creator-hosted University Edition rules call the game a draw. Do not invent a tiebreak based on who used the last reserve piece.
Worked example: carrying five stones
Suppose White controls a five-high stack. White chooses to move three squares east into spaces that do not contain walls or capstones. White picks up all five and deposits two stones in the first square, two in the second and the last stone in the third.
Each landing square now has a new top piece; some newly controlled squares may join a road, while others may lose control depending on the colors exposed by the drop sequence.
The move is legal because five is within the 5×5 carry limit, all drops follow the same straight line, and at least one piece is left in each traversed square.
Common Tak rule mistakes
Do not treat corner-only connections as roads. Do not place a new stone directly onto an occupied square—stacks form by movement. Do not pick up six pieces on a 5×5 board, or move a stack in an L-shape.
Do not count standing walls as road pieces, and never move onto a capstone. A capstone can flatten a wall only with the final single capstone landing.
Finally, keep the first two turns straight: each player places one opponent-colored flat stone before ordinary play begins.
Tak rules FAQ
Does a road need to be straight? No, it may zigzag edge-to-edge. Can I move an opponent-controlled stack? No, not while their piece is on top. Do stones disappear when stacked? No.
How many capstones are used on 5×5? One per player. Can a road include my standing wall? No. What happens if the flat count ties? The University Edition declares a draw.
Are 6×6 rules different? The mechanism is the same, but the carry limit is six and each side uses 30 ordinary stones and one capstone.
Primary rules and the Tak hub
The mechanics were checked against James Ernest’s Tak University Edition rules (PDF), hosted by Crab Fragment Labs, the game’s current rights holder. The explanation and example are original; official diagrams and protected artwork are not reproduced.
For edition history, player suitability and comparisons, see the separate Tak: A Beautiful Game overview. This article addresses the familiar base-game 5×5 rules rather than unofficial tournament variants.