How to Play Ravensburger Labyrinth: Setup, Shifting Tiles & Treasures
Classic Ravensburger Labyrinth rules: shuffle 24 treasures, shift the maze each turn, no immediate reverse, move pawns, collect goals and return home.
Edition-specific rules with practical examples
Quick answer: how do you play Labyrinth?
In classic Ravensburger Labyrinth, players search a changing maze for the treasures shown on their own hidden cards. The first to find every assigned treasure and return to their starting corner wins.
Each turn has two steps in order: first shift one movable row or column of the maze using the spare tile, then move your pawn along any continuous open corridor.
You cannot undo the previous player’s shift by immediately reinserting the expelled spare tile from the same edge. A pushed-out pawn reappears on the newly inserted tile at the opposite side.
Which Labyrinth rules edition is covered?
These rules use the classic Ravensburger Labyrinth moving-maze game, product family 26448, recommended for 2–4 players aged seven and up.
Ravensburger has also released Junior, 3D, licensed and crossover versions. Those can have different components, target sets or movement exceptions.
The material below follows the standard 2017 English Ravensburger instruction leaflet for classic Labyrinth. Use your edition’s enclosed booklet if it specifies a different player count or special rule.
What components are used?
The classic game has a maze board with sixteen fixed tiles, a set of thirty-four movable maze tiles, twenty-four treasure cards and four player pawns.
Place thirty-three movable maze tiles onto the empty positions of the board, leaving exactly one extra movable tile outside the grid for the first player.
Treasure cards show the objects or creatures you must reach. Their order determines each player’s private sequence of destinations.
Step 1: build a random starting labyrinth
Put the game board on the table with its sixteen fixed pathway tiles visible. Shuffle the movable tiles facedown and then fill the board’s thirty-three empty slots with them face up in random order.
Keep the one remaining path tile face up beside the board. It is the spare tile that will be pushed into the labyrinth to move a row or column during the first turn.
Do not rearrange the fixed tiles. The game works because the designated movable rows and columns slide between the fixed positions.
Step 2: distribute the treasure cards
Shuffle the twenty-four treasure cards and divide them equally among the players. With two players that means twelve cards each; with three, eight each; with four, six each.
Make each player’s cards into a facedown personal stack. Look only at the top card of your own pile, keeping that target hidden from opponents.
When you reach your current treasure, reveal the completed card and look at the next card in your stack. You do not choose any treasure on the board at will during the standard rules.
Step 3: place each pawn at its home corner
Each player takes a pawn color and puts it on the corresponding colored corner of the maze. That corner is the player’s home position.
Your home corner matters twice: it is where you begin searching and where you must return after completing all your treasure cards.
The current classic leaflet gives the first turn to the player who last went on a treasure hunt, then turns continue clockwise. Your group can choose another starter if agreed, but that is not the printed criterion.
Step 4: shift the maze before moving the pawn
Find one of the twelve insertion arrows on the outer edge of the maze board. Push the spare tile into that marked row or column until another movable tile exits the opposite side.
The newly pushed-out tile becomes the spare tile for the next player. Leave it visible beside the board so everyone can identify where it came out.
You must shift the maze every turn, even if an open corridor already reaches your current treasure. Skipping directly to pawn movement is not a legal normal turn.
The no-immediate-reversal rule
You may not immediately reverse the shift made by the previous player. In particular, you cannot push the spare tile back into the exact board edge from which it was just expelled.
For example, if the previous player inserted on the left and the spare tile came out on the right of that row, you cannot simply insert from the right on the very next turn to undo it.
This restriction matters even if reversing the shift would give you the easiest access to your treasure. Choose another legal arrow instead.
Step 5: move along connected open corridors
After shifting the maze, you may move your pawn along connected pathway openings for as far as you wish. The movement distance is not limited by a die or fixed step count.
Your route may turn through legal openings and stop at any reachable tile. You may also remain where you are after the mandatory maze shift if that gives you a better position for later.
You cannot pass through a wall or jump between disconnected corridors. Check the newly shifted layout; a route that existed before the shift may no longer be open.
What if a pawn gets pushed off the board?
If the shifting row carries a pawn off the opposite edge, the pawn is placed onto the newly inserted tile at the other end of that same row or column.
This movement happens automatically from the shift. It does not count as that pawn’s voluntary movement, and it can affect another player’s pawn as well as the active player’s.
A pawn is not removed from the game for leaving the edge in this way. It effectively wraps to the opposite end of the shifted row.
Can two pawns occupy the same maze tile?
Yes. Pawns do not block one another’s corridors in standard classic Labyrinth. Multiple players’ pawns can be on the same tile.
Your pawn may travel through or stop on a tile that already contains another pawn, as long as the corridor itself connects legally.
This is unlike games where an occupied square prevents another player from entering. Here the maze walls—not the pawns—determine which paths are open.
How do you collect your current treasure?
If you reach the tile matching the treasure on your top personal card, show that card as completed and put it face up beside your still-hidden stack.
You may then inspect your next treasure card for the next turn. The ordinary rule takes you through your treasure objectives one at a time, in order.
Do not treat a picture you passed earlier as automatically completing a card you have only just revealed. The goal is to reach your current target during the appropriate turn.
How do you win Labyrinth?
After finding the last treasure in your personal stack, your final task is to move your pawn back to the home corner matching your color.
The first player to finish all their treasure cards and return home wins. Finding your last treasure alone does not end the standard game.
The board continues shifting during this final journey, so a seemingly close home corner may be blocked by a later player before you can reach it.
Worked example: shift first, reach a treasure second
Your current treasure is on a path tile near the upper-right part of the board. Before your turn there is no continuous corridor from your pawn to that tile.
Take the spare tile and insert it at a legal marked arrow, moving one row sideways. The shift brings the target’s corridor into connection with your pawn’s location. Then trace the open passage and move to the target.
Reveal your matching treasure card and look at the next top card. Keep the newly expelled maze tile beside the board; the next player must work from it and cannot simply reverse your insertion.
Optional easier version for younger players
Ravensburger includes a younger-children variation in which players can place their treasure cards face up, allowing them to choose any of their still-uncollected targets on each turn.
This removes the rigid hidden-card order and lets a child focus on finding an accessible treasure. It is an optional teaching approach, not the normal competitive game.
Some older editions also mention an optional easier finishing condition. Agree before play whether the home-corner return is required, instead of changing that condition halfway through.
Common Labyrinth rules mistakes
Wrong: move your pawn first and shift the maze afterward. The maze shift is mandatory and comes first.
Wrong: immediately reverse the previous insertion, ignore a pawn displaced off the edge, or limit pawn movement to a fixed number of squares.
Wrong: reveal every personal treasure card during standard setup, collect targets out of sequence, or announce victory before returning to the home corner.
Ravensburger Labyrinth rules FAQ
Do you have to move the maze every turn? Yes. How far can a pawn move? As far as an unbroken corridor permits, or it may stay still.
Can you immediately reverse the last shift? No. What if a pawn is pushed off? It reappears on the inserted tile at the opposite edge.
Do you win after the final treasure? Not yet; reach your starting corner too. Can multiple pawns share a tile? Yes.
Official Ravensburger rules and related guides
Rules checked against Ravensburger’s classic Labyrinth 26448 English instructions, the current publisher game page and an earlier Ravensburger classic rulebook for consistent movement clarifications.
This guide is an original step-by-step description. For the game’s audience, editions and comparisons, visit our Ravensburger Labyrinth game overview.
Do not confuse this game with Carcassonne Labyrinth, a separate crossover product with different rules.