Home › How to Play › Catan › 5–6 Player Rules
CATAN 5–6 · CURRENT PAIRED-PLAYER RULES

Catan 5–6 Player Rules (2025): Paired Turns & Building

The official 2025 extension has two players taking action phases in each paired turn. Learn who acts, who can trade and how the old rule differs.

PLAYER 1 → PLAYER 2
EVERGREEN RULES REFERENCECatan

Publisher rules and practical examples

2025 rulesPaired players5–6 players

Quick answer: how does Catan work with five or six players?

The 2025 Catan 5–6 Player Extension uses a paired-player turn, replacing the old Special Building Phase. Each complete turn contains a Production phase and Action phase for Player 1, followed by a separate Action phase for Player 2.

Player 2 is the participant sitting third to the left of Player 1, regardless of whether there are five or six people. Player 2 may build, play a permitted development card and trade with the supply/bank, but may not trade with other players during this second Action phase.

Either participant can win on their own part of the paired turn by reaching 10 victory points. If Player 1 wins, the game ends immediately and Player 2 does not take the extra Action phase.

What is needed to play Catan with five or six?

The normal CATAN base box supports the standard smaller group. To play with five or six people using the official larger map and piece quantities, add the matching CATAN 5–6 Player Extension to the base game.

The extension supplies more terrain/frame components, additional player-color pieces and extra resource and development cards as indicated by its version. Set up the large island using the edition-specific rulebook, rather than assuming the normal small island is simply shared by more players.

There are differences in components and edition compatibility. The publisher’s compatibility guidance explains how current and earlier English editions combine. Buying a game expansion alone does not necessarily provide the separate five-to-six-player extension needed for it.

Fixed versus variable setup in the extension

The current rulebook provides Fixed Setup and Variable Setup for the larger island. Fixed Setup follows the pictured terrain hex, number disc and starting settlement positions; it is suitable for first games with the extension.

Variable Setup begins with the larger frame and randomized terrain layout. Place number discs in the specified order, skipping desert hexes as instructed by the rulebook. The exact positions shown in the printed diagram matter more than a generic advice to scatter numbers randomly.

Use the printed resource allocations and initial settlement instructions for whichever setup you choose. Do not invent an extra starting roll or give every player the same fixed resources when the official diagram lists different starting hexes.

Who is Player 1 and who is Player 2?

Determine the first player by the usual rule, then give that participant the Player 1 marker. Give the Player 2 marker to the person sitting third to the left of Player 1. This is the paired participant for the turn.

In a five-player game, count seats clockwise from Player 1: first person to the left, second, then third. The third person is Player 2. In a six-player game, the rule uses the same third-person offset.

After Player 2 finishes their Action phase, pass the dice and both player markers one seat to the left. The next Player 1 begins with a new Production phase. The pairing changes as turn order advances.

Phase one: Player 1 rolls and production occurs

Player 1 begins with the standard Production phase: roll the dice and allocate resources to all eligible players’ settlements and cities according to the result. A seven triggers the ordinary robber and discard procedures, handled in the proper sequence.

The important point is that Player 2 does not take an additional dice roll when their second Action phase begins. Production happened once for the paired turn, at Player 1’s start.

Because all eligible settlements may produce resources on that shared roll, the future Player 2 can often use resources they just collected. Their extra opportunity to act increases activity between full dice turns without creating an extra production roll.

Phase two: Player 1’s normal Action phase

After Production, Player 1 takes the ordinary CATAN Action phase. They may trade with other players, trade with the supply at the applicable rate, build roads, settlements or cities, buy development cards and play an eligible previously bought development card.

The regular rules still restrict development-card plays. You do not gain permission to play two normal development cards during the same Action phase merely because the game has more players.

If Player 1 reaches 10 victory points during this part of the paired turn, the game ends immediately. The second participant does not get a chance to build afterward. The current rulebook states this explicitly.

Phase three: what Player 2 is allowed to do

After Player 1 finishes without winning, Player 2 takes an Action phase only. They may use legal building actions, trade with the bank/supply at the relevant exchange rate or port, and play up to one eligible development card under the normal timing restrictions.

The single major restriction is no trading with other players. Player 2 cannot negotiate a two-for-one swap with a rival at this stage, even if both would benefit. However, maritime/bank trading remains available because it is trading with supply, not another player.

Player 2 does not re-roll the dice or repeat the robber procedure from Player 1’s Production. Other players do not receive a second round of production simply because Player 2 now has the right to act.

Can Player 2 buy or play a development card?

Yes. The 2025 paired-player chart explicitly includes play one development card (optional) in Player 2’s Action phase. The player can also purchase a development card through the normal Build rules when they have the correct resources.

The official note explains that a development card bought while acting as Player 2 can later be played normally when that person becomes Player 1, and vice versa. The ordinary rule preventing a just-bought card from being played immediately still applies.

For example, you buy a Knight while acting as Player 2. You cannot immediately play that newly purchased Knight during the same Action phase. On a later legal turn as Player 1, it may be played according to the normal timing. See our development-card rules.

Can Player 2 win during the extra Action phase?

Yes. Player 2 is taking an official part of the paired turn and can win if their actions bring their total to the required 10 victory points. The game then ends immediately, just as it would for Player 1.

Example: Player 2 enters their Action phase on nine visible points, has the resources for a settlement, and can legally place it. They build that settlement, raise their total to ten and win immediately. No further rolls or Build actions from other players occur.

The standard winning requirement still applies: your true total includes eligible buildings, awards and Victory Point cards. The paired-player rule changes action opportunities, not the target score.

How markers pass after each paired turn

After Player 2 finishes their Action phase, and assuming nobody has won, move the dice and the two special markers to the next players to the left. The next Player 1 then starts with Production.

Example with six seats A–F in clockwise order: A is Player 1 and D is Player 2 for this paired turn. After both complete their phases, B becomes Player 1 and E becomes Player 2. Then C and F form the following pair.

The partner is not chosen randomly every time. Following the third-seat offset as the markers rotate avoids disagreements about who has already acted and who can make bank trades between dice rolls.

Why some older rulebooks mention a Special Building Phase

Older Catan 5–6 extensions used a Special Building Phase, allowing players who were not active to build during a separate interval after the active turn. That earlier system had narrower permissions and is still described in old FAQs and secondhand guides.

The publisher introduced a paired players replacement rule and incorporated it into the 2025 extension rulebook. The current rules explicitly say that the new paired system replaces the older Special Building Phase.

If you own older physical components, the publisher also provides a downloadable paired-player rules update. You can use the current procedure with an older extension when compatible. For an organized game, agree which edition’s rules will govern before the first dice roll.

Bank and port trade example: Player 2 may act

Player 2 starts their Action phase with four wood cards and no other resources. Under ordinary four-to-one maritime trading, they may trade those four wood to the supply for one chosen resource, subject to any valid port advantages they own.

They can then spend that resulting card on a legal build if they have all the required resources. They may not instead ask a neighboring player to exchange wood for brick, because another-player trading is unavailable in the second phase.

The restriction is about who the trade is with, not about whether the exchange happens during a normal or supplemental Action phase. Port trade and supply trade remain legal. For exchange rates see our Catan trading and ports guide.

Worked six-player example: one production, two actions

Six players sit A, B, C, D, E and F in order. A is Player 1 and D is Player 2. A rolls a six. Every player with a qualifying unblocked settlement or city on a six hex receives the corresponding resource cards.

A then trades with B, builds a road and buys a development card. A remains below ten VP and ends the Action phase. D now takes the second Action phase. D does not roll, but may spend resources, build a city and trade with the bank. D cannot trade directly with C.

D ends without reaching ten points, so the dice and markers pass on to B and E. B rolls for the next paired turn. The rule provides more opportunities to improve a position without duplicating the production roll.

Common five-to-six-player mistakes

Mistake: letting Player 2 roll the dice again. Only Player 1 performs Production for each paired turn.

Mistake: allowing Player 2 to trade directly with opponents. Only supply/bank trading is permitted during that second phase.

Mistake: using the old Special Building Phase on top of paired turns. The current rule replaces that phase rather than adding another one.

Mistake: making Player 2 the adjacent player instead of the third player to the left. Rotate both markers consistently after each complete paired turn.

Catan 5–6-player paired turn FAQ

Does five-to-six Catan require an extension? Yes, use the matching larger-game component set.

How many players act per paired turn? Two, but only Player 1 has Production.

Who is Player 2? The third player to the left of Player 1.

Can Player 2 trade with others? No.

Can Player 2 trade with the bank or port? Yes.

Can Player 2 play a development card? Yes, subject to the normal rules.

Can Player 2 win? Yes, on reaching the usual victory-point target.

Is the Special Building Phase still the current rule? No, it was replaced by paired play in the current extension.

Official Catan 2025 rules and compatibility references

Checked against the 2025 Catan 5–6 Player Extension rulebook and the publisher’s announcement explaining paired-player replacement. The game-rule edition, partner marker positions and exact Action phase restrictions come from those documents.

Additional reading: Catan overview, How to Play Catan, Development cards, and expansions and compatibility. Independent rules commentary, November 2026.

Learn at Your LevelFrom beginner to expert
Complete CoverageRules, strategy, expansions and more
Trusted RecommendationsCurated by board game enthusiasts
Always UpdatedNew guides and games regularly

Similar Posts