Home › How to Play › Spirit Island › Rules Reference
SPIRIT ISLAND · INVADER PHASE RULES

Spirit Island Invader Phase: Ravage, Build & Explore Order

A step-by-step reference to card progression, blight, Dahan retaliation, fear effects and preventing future builds.

RAVAGE → BUILD → EXPLORE
EVERGREEN RULES REFERENCESpirit Island

Verified against published rules

RulesExamplesFAQs

Quick answer: which order do Invaders act in?

In Spirit Island, the Invader Phase is resolved in this order: any applicable Blighted Island effect, then earned Fear cards, followed by Ravage, Build and Explore. At the end, move the Invader cards one slot toward Ravage, discarding any old Ravage card.

The order is easily misremembered because an area normally Explores in one round, Builds in the next and Ravages in the one after. That describes the lifecycle of a single card, not the order of operations inside one Invader Phase. The printed board resolves Ravage first, then Build, then Explore.

This page describes the base-game phase structure. Expansions with Events, additional Adversary effects or other modifications can add steps or change individual actions; follow those effects while keeping the default sequence clear.

The complete Invader Phase checklist

Start with the Blighted Island card if its face-up side has an instruction to resolve now. If your game is still on the Healthy Island side and has no active text for this step, there may be no additional effect. Next resolve the Fear cards already earned for this phase.

Then read the Invader cards currently occupying the board’s Ravage and Build slots. Resolve those action types in that order in all lands whose terrain matches the cards, subject to any restrictions or specific adversary rules.

For Explore, reveal the next Invader card and place explorers into eligible lands of the terrain shown. Finally, advance the cards on the board: the old Ravage card is discarded, the Build card shifts to Ravage, and the Explore card shifts to Build.

Why the Invader board has three card spaces

An Invader card represents a terrain type or later a combination of terrains, depending on its stage. Its position shows what the Invaders are doing in those lands this round. A Jungle card under Ravage targets Jungle lands; a Sands card under Build targets Sands lands.

Do not resolve the same Invader card three times during one phase merely because the board shows three labeled action spaces. Each card remains in its current slot until the Advance step and therefore triggers only the type of action for that slot.

If a slot has no Invader card, it normally performs no Invader action of that type. Certain Events, Adversaries or Power effects can create extra actions or duplicate cards; those exceptions should be handled explicitly instead of assuming each board space always holds exactly one card.

Ravage: damage to land, blight and Dahan

During Ravage, Invaders in each affected land deal damage equal to their units: Explorer 1, Town 2 and City 3. Add the damage contributed by the Invaders present. Damage to the land and to the Dahan is considered as required by the rulebook, including effects that reduce or prevent damage.

If the land takes two or more damage, add one Blight. Additional damage does not normally place extra Blight in the same Ravage just because the total reached four or six. A land already holding Blight may trigger the cascade rule when another is added.

When Invaders deal damage to Dahan, distribute it as allowed by the rules; two damage destroys one Dahan. After Invader damage, surviving Dahan counterattack for two damage each against the Invaders. Dahan destroyed in the initial strike do not retaliate.

Ravage example: one Town and two Dahan

A Jungle contains one Town and two Dahan, with no Defend effects. On a Jungle Ravage, the Town deals two damage to the land, placing one Blight. The same attack can deal two damage to the Dahan, destroying one of them.

The surviving Dahan then retaliates for two damage, enough to destroy the Town if no other protection or modification applies. Destroying a Town generates the normal one Fear. The other Dahan does not contribute damage because it was destroyed before retaliation.

Notice the timing: even though the Town may die to the Dahan counterattack, its two damage already caused Blight. You cannot reverse a completed land-damage step because the defenders later remove the last Invader.

What changes if the land already has Blight?

When a Ravage places Blight in a land that already has Blight, the standard rule creates a Blight cascade. Another Blight must be placed into an adjacent land as specified, potentially triggering further consequences if that destination also contains Blight.

Placing Blight also removes one Presence from each Spirit present in the affected land under the ordinary rules. This is distinct from Dahan damage: Dahan count their own health and are not automatically removed solely because a Spirit loses Presence.

If the Blight supply on the Healthy/Blighted Island card reaches its trigger, check the actual Blight card and loss conditions. Do not assume that adding one Blight always means immediate defeat; the result depends on the game’s selected Blight-card setup.

Build: when does a land receive a Town or City?

During the Build step, look at the Invader card in the Build slot. A matching land with at least one Invader normally Builds. If the land contains a Town, add a City; otherwise add a Town. A City without a Town does not automatically count as a Town for this selection.

A land that matches the Build terrain but has no Invaders normally does not Build. This is a key defensive opportunity: removing the Explorer during the earlier round can prevent the Town from ever appearing, saving further actions.

Example: the Build card shows Mountains. One Mountain has an Explorer and no Town, so it adds a Town. Another Mountain has a Town and an Explorer, so it adds a City. An empty Mountain receives nothing under the standard rules.

Explore: not every matching land receives an Explorer

During Explore, reveal the next Invader card. For each land of the indicated terrain, add an Explorer only if that land contains or is adjacent to a source of exploration: a Town, a City, or the Ocean, following the base rules and any effects that change the source test.

The presence of an Explorer alone does not normally make a neighboring land a source for a future Explore. A land with no adjacent eligible source may therefore remain unoccupied even when the matching terrain card appears.

Because Explore happens last within the phase, new Explorers normally do not immediately Build or Ravage during that same turn. They wait for the corresponding card to advance on later turns, unless an additional effect explicitly causes another Invader action.

Advance cards: how the three-turn warning develops

After Explore, shift the cards one step: the old Ravage card goes to discard, the old Build card becomes next round’s Ravage, and the newly revealed Explore card becomes next round’s Build.

For example, a Sands card revealed in Explore this turn will normally be in Build next round and then Ravage the following round. This progression provides the game with its predictable threat timeline, even though the next terrain revealed for Explore is still unknown.

Use this warning to prioritize Fast powers before a Ravage, and to choose Slow powers that will prevent an expected Build or remove Invaders before the next Ravage.

Why the first Invader Phase has no Ravage

At the start of a basic Spirit Island game, an initial Explore card is resolved as part of setup and moved into the Build slot. The Ravage slot is empty. Thus, in the first normal Invader Phase, there is no standard Ravage card to act on.

The first major threat is usually the Build in the terrain that was explored during setup. You can use your starting Fast and Slow powers to disrupt those Explorers before a following round’s Ravage becomes dangerous.

With adversaries and scenarios, additional setup effects may change the board or action sequence. Do not transplant this simplified first-turn rule to a scenario where printed instructions specifically create extra Invader actions.

Fear effects resolve before Ravage, not after

When you earn a full Fear card, it joins the earned pile. During the next applicable Invader Phase, resolve earned Fear effects before Ravage, Build and Explore. This timing can prevent damage, remove or move invaders, or otherwise change which lands will act.

Resolve the effect at the currently applicable Terror Level. Earning further Fear while resolving the pile follows the rulebook’s handling of newly earned cards; do not treat the entire future Fear deck as immediately resolving.

A Fear card that removes a Town from a land before the Ravage can change damage and the subsequent Build outcome. For the terror and victory system, see our Spirit Island Fear and Terror rules.

Fast and Slow Powers relative to the Invader Phase

The standard round includes the Spirit Phase, then Fast Power Phase, then the Invader Phase, and finally the Slow Power Phase before Time Passes. This is why a Fast Defend power can protect against the current Ravage.

A Slow power is not simply lost because it cannot stop the Ravage that just happened. It can push Explorers after Explore, destroy units that were just built, or prepare for the next Ravage. Some Slow powers can affect the future threat even more efficiently than emergency damage prevention.

If a power changes the terrain or prohibits Invader actions, apply that card’s exact timing. Do not move Invader cards backward or skip the printed shift just because a land produced no actual pieces that round.

What changes with Branch & Claw or Jagged Earth Events?

The base game does not use the standard Event deck that appears in Branch & Claw and Jagged Earth. With that module included, an Event step is added earlier in the Invader Phase, before the earned Fear cards and before ordinary Ravage, Build and Explore actions.

Events can modify Invader damage or other rules, so a base-game Ravage example may need recalculation when an Event adds a condition. Adversary rules can also change the number of Invader cards or introduce more than one Build or Ravage.

For an accurate teaching sequence, decide which expansions and adversaries are actually being used. Then insert their specified steps into the base framework instead of ignoring them or pretending they apply universally.

Spirit Island Invader Phase FAQ

Does Explore happen before Ravage in a phase? No. The order is Ravage, Build, then Explore.

Can a land with no Invaders Build? Normally no, even when its terrain matches the Build card.

Does a City count as a Town when choosing what Builds? No; if no Town is present, the standard Build adds a Town.

How much damage does an Explorer do? One; Towns do two and Cities three.

When do Dahan retaliate? After Invader damage, using surviving Dahan.

When are earned Fear cards resolved? Before ordinary Ravage, Build and Explore.

Do Explorers always enter all matching lands? No, they normally need a Town, City or Ocean source in or adjacent to the land.

When are Invader cards advanced? After the Explore step.

Official and independent rules references

Verified November 19, 2026 against Dized’s Spirit Island Invader Phase reference and Greater Than Games’ official Spirit Island information. Expansion rulebooks and adversary panels govern deviations from the base sequence.

Read How to Play Spirit Island, Fear and Terror, Fast and Slow Powers and the game guide. This is a paraphrased rules explanation rather than an official rulebook reproduction.

Learn at Your LevelFrom beginner to expert
Complete CoverageRules, strategy, expansions and more
Trusted RecommendationsCurated by board game enthusiasts
Always UpdatedNew guides and games regularly

Similar Posts